Category: Converting Equipment and Machinery

In addition to the more commonly used slitting methods (razor, shear, score) Pinnacle Converting has integrated methods such as ultrasonic slitting into machines for our clients. This method produces a sealed edge on the material without creating a bead along the edge which can cause the end of the roll to bulk or develop a...
The CSRE-Economical Razor Slitter Rewinder, or CSRE II, is designed to handle light-duty slitting jobs for materials that can be cut with a razor blade. This machine can be easily set-up and run by one operator. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can...
At Pinnacle Converting, most of the machines we design and build are slitter rewinders and sheeting machines. The machine shown here was a custom built sheeting and sealing machine designed to seal several pieces of material together and sheet them. See the machine in action at our facility below.
The COMPACT-18 Slitter Rewinder, or CSR-18, is designed to be a rugged machine built to handle the day-to-day production for smaller rolls. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the web when traveling over numerous idler rollers. The CSR-18 is...
Our capabilities include designing and manufacturing wide width sheeting machines like the one seen here. This machine was built to sheet material with a width of over 72″. We’ve built sheeting machines to sheet material from 12″-120″ wide.
Suited for small rolls of material, our tabletop sheeting machine is perfect for sheeting material using a small amount of space and one operator. The machine seen here was built specifically for material approximately 15 inches wide, can be easily set-up, and only requires one operator.
An excellent addition to any operation not in need of a full-time sheeting machine. The semi-manual sheeting machine shown here allows an operator to easily load a roll of material onto its unwind stand. The operator then pulls material through to the set length, triggering the material clamp, allowing the operator to manually cut the...

Contact Pinnacle Online

Contact by Phone

Contact a Sales Representative M-F 8am-5pm at 704-350-2593

Categories