Machines By Industry

Pinnacle Converting Equipment has designed and built thousands of machines since 1995. Below are recent projects sorted by the specific industry they were built for. Most machines can be utilized in multiple industries.

  • Machines By Industry
  • Auto
  • Construction
  • Consumer Goods
  • Geosynthetics
  • Medical
  • Solar
  • Tapes and Adhesives

154″ Bag Sealing Line

The line above is a 154" Wide Custom Bag Making Machine used to semi-automatically produce large bags used to ship liquids. This machine is designed to accept material from rolls on the unwind stands and produce bags of any length and width. An operator keypad allows for easy programming and repeat selections. Machine Information and...

55″ Rubber Slitting Machine

The machine shown was built to slit rubber gasket material utilizing low tension loops and score slitting. It was also designed to slit other materials in other operating modes. Machine Information and SpecsApplicationsFeaturesInquireApplications Web Width: 55" Unwind Roll Dia.: 30" Unwind Roll Max. Weight: 500 lbs. Rewind Roll Dia.: 16" Operator Requirement: 1 Speed: Up...

Polyester Bag Slitting Line

This is a custom machine built to make 2D and 3D Bio-Reactor Bags. The machine utilized multiple unwinds to bring layers of material together, seal them to width, slit, and sheet the material in order to create bags used in the medial industry.  Two machine modes allow for the machine to be used to rewind...

72″ CSRE Razor Slitter Rewinder

This machine is a modification of our standard CSRE Model Slitter Duplex Rewinder with the specifications to operate inside a cleanroom environment.  This razor slitter rewinder provides means to unwind from a 72” web width, 20” diameter master material roll, razor slit the material in line, and rewind the material onto two rewind air shafts...

Duplex Turret Tape Slitter Rewinder

The slitter rewinder shown is one of our standard machine offerings that was built to spec and is designed to achieve desired cycle times. This turret slitting machine is capable of slitting master rolls of self wound tapes, adhesive films and laminations with a diameter of up to 35″ in. to a minimum .5″ in...

VSR III: Duplex Stacked Shear Slitter Rewinder

This machine is a modification of our own VSR (Versa) design and was built to slit coated foils to small widths using the stacked shear slitting method. With speeds of up to 400 fpm, this machine is capable of slitting unwind rolls of up to 30" diameter into multiple rolls at 1" wide onto a...

74″ Adhesive Tape Slitter Rewinder

This slitter rewinder was designed to slit adhesive material on rolls of up to 74" wide. This user friendly design includes touch screen controls and a pivoting rewind shaft system that assists the operator in doffing slit rolls without having to lift shafts out of the shaft chucks. Built for speeds of up to 300...

VSR 60″ Shear Slitting Machine w/ Auto Doffing

This VSR 60″ Shear Slitting Machine is a custom machine built to handle large rolls. The machine shown here slits material using the shear cutting technique, rewinds onto 12″ cantilevered differential shafts, and unloads the slit rolls automatically to reduce operator handling. Built with the operator’s safety in mind, the pedestal control center can be...

Tangential Shear Slitting Machine

The slitting machine shown is an example of one of our tangential stacked shear slitting machines. This machine was built for high-precision slitting and is capable of slitting various materials including thin film. This machine has two (2) cantilevered differential rewind air shafts to suit 3” ID plastic cores. The shaft slip torque is automatically...

Duplex Slitter Rewinder with Inspection Lighting

The machine shown above is a Duplex Slitter Rewinder with capabilities to slit using both razor and score slitting techniques. This machine was built to spec with the operator in mind utilizing the customer’s needs and requirements. The backlit inspection surface is an addition that assists in detecting flaws or imperfections in the material. The...

Versa 3: Duplex Slitter Rewinder

The VERSA III Slitter Rewinder, or VSR III, is designed to be an operator-friendly machine that can withstand the rigors of day-to-day production. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the web when traveling over numerous idler rollers. The VSR…

Wide Web Surface Slitter Rewinder

The machine seen here is a custom surface slitter rewinder built to handle large rolls. This machine was built with a heavy duty shaftless unwind stand, a walkover for blade and threading access, as well as, a score slitting package built for cutting 220″+ rolls into rolls of smaller widths. Our capabilities and past project experiences provide...

Surface Slitter Rewinder

This slitter rewinder was built to slit material using the surface rewinding method. This machine boasts a small footprint which makes it easy to relocate and stage on your manufacturing floor. Using only 10V power supply, this machine can cut material up to 200 fpm onto 3″ or 6″ cores. Machine Information and SpecsApplicationsFeaturesInquireApplications Material:...

Custom Sheeting Machine with Conveyor

The custom built-sheeting machine shown above is a highly accurate machine used to turn rolls of material into sheets. The model shown here also has an additional hole-punch and detect feature that can be modified by replacing the die. This model provides means to unwind one 6” wide, 300mm diameter master roll of material, punch...

Versa 18: Duplex Differential Slitter Rewinder

The slitter rewinder shown above is a smaller version of our own in-house slitting machine. This machine has the capability to cut various materials using razor, score, or shear blade slitting methods. It can also be fitted for hot-knife slitting. Video Machine Information and SpecsApplicationsFeaturesOptions/UpgradesInquireApplications Material: Various 30" Diameter Unwind 18" Diameter Duplex Rewind Width: 62"...

Ultrasonic Plastic Slitting Machine

Machine Information and SpecsApplicationsFeaturesInquireApplications Med.-High Usage Cutting Method: Ultrasonic Built to slit materials including: plastics, fabrics, films 36" to 96" models standard Slits with sealed edges Features 3" air rewind shafts 30" Diameter Unwind Roll - Larger capacity available 20" Diameter Rewind - Larger capacity available Easy and convenient controls Pneumatic tension brake Automatic tension control...

CSRE-50″ Razor Slitter Rewinder

CSRE-50 Slitter Rewinder Condition: Like New Width: 50" Web Slitting Method: Razor Slitting Speed: 100 fpm Rewind Diameter: 12" Unwind Diameter: 18" Power: 110v Also included on this machine: [list type="iconok"] Automatic Tension Control Automatic Edge Guide Automatic Length Counter Individual Razor Blade Holders Easy to Operate Controls Emergency Stops Casters for Mobility Nexen Pneumatic...

Laser Sheeting Machine

The machine shown below is a brief preview of a custom built sheeting machine that was customized for sheeting and stacking material. Although not shown, after the laser cutting process achieves the set number of cuts, the stacks of material then travels on a conveyor towards the endpoint where an operator moves it to the...

Foil Slitting Machine

The Foil Slitting Machine seen here was modeled off of our very own CCSR but designed and built specifically to unwind, slit, and rewind foils and films. Machine Information and SpecsApplicationsFeaturesInquireApplications Materials: Foils, Films Slitting Method: Shear Widths range from 24 and up" Speed Capacity: 600 FPM Power Supply: 110v, 230v Unwind Diameter: 24" Rewind Diameter: 14"...

Tabletop Sheeting Machine

Suited for small rolls of material, our tabletop sheeting machine is perfect for sheeting material using a small amount of space and one operator. The machine seen here was built specifically for material approximately 15 inches wide, can be easily set-up, and only requires one operator.

Manual Sheeting Machine

An excellent addition to any operation not in need of a full-time sheeting machine. The semi-manual sheeting machine shown here allows an operator to easily load a roll of material onto its unwind stand. The operator then pulls material through to the set length, triggering the material clamp, allowing the operator to manually cut the…

HSRE- Economical Hot Knife Slitter Rewinder

The Economical HOT KNIFE Slitter Rewinder, or HSRE, is an affordable version of the HSR and built to handle the day-to-day production for materials requiring a sealed edge. Designed for low-medium usage, the design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the…

error: Protected Content