Category: Machine Type
15 May 2013 - 19:38,
by Pinnacle Converting,
in Center Winding, Converting Equipment and Machinery, Custom Machine, Hot Knife Slitting, Pro, Slitter Rewinders, Wovens, Comments off
The HSR is similar to the HSRE but can handle more of a workload and has higher speed capabilities. This machine was designed to slit materials such as nylon and sailcloth with a sealed edge. The HSR is operator friendly with easy to locate and adjust blade holders as well as east and convenient controls....
2 April 2013 - 18:46,
by Pinnacle Converting,
in Converting Equipment and Machinery, Custom Machine, Custom Sheeters, Healthcare/Medical, Non-Wovens, Sheeting Machinery, Comments off
2 April 2013 - 17:47,
by Pinnacle Converting,
in Center Winding, Converting Equipment and Machinery, Custom Machine, Non-Wovens, Pro, Slitter Rewinders, Ultrasonic Slitting, Wovens, Comments off
In addition to the more commonly used slitting methods (razor, shear, score) Pinnacle Converting has integrated methods such as ultrasonic slitting into machines for our clients. This method produces a sealed edge on the material without creating a bead along the edge which can cause the end of the roll to bulk or develop a...
6 March 2013 - 15:24,
by Pinnacle Converting,
in Center Winding, Consumer Goods, Converting Equipment and Machinery, Foils, Shear Slitting, Slitter Rewinders, Standard, Vinyls, Comments off
20 February 2013 - 19:04,
by Pinnacle Converting,
in Center Winding, Converting Equipment and Machinery, Economy, Razor Slitting Machinery, Slitter Rewinders, Comments off
The CSRE-Economical Razor Slitter Rewinder, or CSRE II, is designed to handle light-duty slitting jobs for materials that can be cut with a razor blade. This machine can be easily set-up and run by one operator. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can...
19 February 2013 - 16:51,
by Pinnacle Converting,
in Converting Equipment and Machinery, Custom Machine, Custom Sheeters, Sheeting Machinery, Comments off
At Pinnacle Converting, most of the machines we design and build are slitter rewinders and sheeting machines. The machine shown here was a custom built sheeting and sealing machine designed to seal several pieces of material together and sheet them. See the machine in action at our facility below.
19 February 2013 - 13:56,
by Pinnacle Converting,
in Center Winding, Converting Equipment and Machinery, Non-Wovens, Razor Slitting Machinery, Score Slitting, Shear Slitting, Slitter Rewinders, Standard, Wovens, Comments off
13 February 2013 - 20:59,
by Pinnacle Converting,
in Converting Equipment and Machinery, Razor Slitting Machinery, Score Slitting, Slitter Rewinders, Standard, Wovens, Comments off
The COMPACT-18 Slitter Rewinder, or CSR-18, is designed to be a rugged machine built to handle the day-to-day production for smaller rolls. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the web when traveling over numerous idler rollers. The CSR-18 is...
17 December 2012 - 21:17,
by Pinnacle Converting,
in Converting Equipment and Machinery, Custom Machine, Custom Sheeters, Sheeting Machinery, Comments off
Our capabilities include designing and manufacturing wide width sheeting machines like the one seen here. This machine was built to sheet material with a width of over 72″. We’ve built sheeting machines to sheet material from 12″-120″ wide.
17 December 2012 - 21:01,
by Pinnacle Converting,
in Consumer Goods, Converting Equipment and Machinery, Custom Machine, Sheeting Machinery, Standard Sheeters, Comments off
Suited for small rolls of material, our tabletop sheeting machine is perfect for sheeting material using a small amount of space and one operator. The machine seen here was built specifically for material approximately 15 inches wide, can be easily set-up, and only requires one operator.
