Converting Equipment: Duplex Slitter Rewinders

The VTS machine features a dual turret rewind designed to keep run time to a maximum. This machine will continuously slit and rewind rolls of material to length, stop, cut and glue the ends of the material to their respective slit rolls. The design maximizes runtime and significantly minimizes the operators time in between core...

The line above is a 36″ wide custom slitting machine used to slit tough materials such as coated aramids. This machine is designed to accept material on roll of up to 300 lbs., unwind and slit through a series of blades. The material is wound onto cores placed onto (2) rewind shafts. An operator keypad...

The machine shown is a 64" Center Surface Slitter Rewinder and was designed to slit master rolls of medical nonwoven material to 1" widths. Fully guarded and secured, this machine was built to slit rolls up to 16" in diameter at 1200fpm. The lifting unwind and guarding around the slitting and rewind sections of the...

The machine shown was built to slit rubber gasket material utilizing low tension loops and score slitting. It was also designed to slit other materials in other operating modes. Machine Information and SpecsApplicationsFeaturesInquireApplications Web Width: 55" Unwind Roll Dia.: 30" Unwind Roll Max. Weight: 500 lbs. Rewind Roll Dia.: 16" Operator Requirement: 1 Speed: Up...

This machine is a modification of our standard CSRE Model Slitter Duplex Rewinder with the specifications to operate inside a cleanroom environment.  This razor slitter rewinder provides means to unwind from a 72” web width, 20” diameter master material roll, razor slit the material in line, and rewind the material onto two rewind air shafts...

The slitter rewinder shown is one of our standard machine offerings that was built to spec and is designed to achieve desired cycle times. This turret slitting machine is capable of slitting master rolls of self wound tapes, adhesive films and laminations with a diameter of up to 35″ in. to a minimum .5″ in...

This machine is a modification of our own VSR (Versa) design and was built to slit coated foils to small widths using the stacked shear slitting method. With speeds of up to 400 fpm, this machine is capable of slitting unwind rolls of up to 30" diameter into multiple rolls at 1" wide onto a...

This slitter rewinder was designed to slit adhesive material on rolls of up to 74" wide. This user friendly design includes touch screen controls and a pivoting rewind shaft system that assists the operator in doffing slit rolls without having to lift shafts out of the shaft chucks. Built for speeds of up to 300...

This VSR 60″ Shear Slitting Machine is a custom machine built to handle large rolls. The machine shown here slits material using the shear cutting technique, rewinds onto 12″ diameter cantilevered differential shafts, and unloads the slit rolls automatically to reduce operator handling. Built with the operator’s safety in mind, the pedestal control center can...

The slitting machine shown is an example of one of our tangential stacked shear slitting machines. This machine was built for high-precision slitting and is capable of slitting various materials including thin film. This machine has two (2) cantilevered differential rewind air shafts to suit 3” ID plastic cores. The shaft slip torque is automatically...

The machine shown above is a Duplex Slitter Rewinder with capabilities to slit using both razor and score slitting techniques. This machine was built to spec with the operator in mind utilizing the customer’s needs and requirements. The backlit inspection surface is an addition that assists in detecting flaws or imperfections in the material. The...

This Duplex Slitter Rewinder is a 62″ CSR Razor Slitter built with score and razor slitting capabilities.

The VERSA III Slitter Rewinder, or VSR III, is designed to be an operator-friendly machine that can withstand the rigors of day-to-day production. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the web when traveling over numerous idler rollers. The VSR...

The slitter rewinder shown above is a smaller version of our own in-house slitting machine. This machine has the capability to cut various materials using razor, score, or shear blade slitting methods. It can also be fitted for hot-knife slitting. Video Machine Information and SpecsApplicationsFeaturesOptions/UpgradesInquireApplications Material: Various 30" Diameter Unwind 18" Diameter Duplex Rewind Width: 62"...

Machine Information and SpecsApplicationsFeaturesInquireApplications Med.-High Usage Cutting Method: Ultrasonic Built to slit materials including: plastics, fabrics, films 36" to 96" models standard Slits with sealed edges Features 3" air rewind shafts 30" Diameter Unwind Roll - Larger capacity available 20" Diameter Rewind - Larger capacity available Easy and convenient controls Pneumatic tension brake Automatic tension control...

This slitter rewinder is ideal for manufacturers working with films and foils. With a footprint of 6x10', the machine shown is capable of slitting a roll weighing up to 700 lbs. up to 600 fpm. Other details and specs are below. Machine Information and SpecsApplicationsFeaturesOptional FeaturesInquireApplications Material: Films 20" Diameter Unwind Roll - Larger capacity available...

The HSRE is the simplest Hot Knife Slitting Machine that we offer. It is designed for roll sizes of up to 14" in diameter. Perfect for materials such as nylon and poly-cotton fabrics, this machine can hot knife slit rolls of material that requires a sealed edge to prevent fraying. More specs and details are...

Machine Information and SpecsApplicationsFeaturesInquireApplications Width: 50″ Web Slitting Method: Razor Slitting Speed: 100 fpm Rewind Diameter: 12″ Unwind Diameter: 18″ Power: 110v Features Automatic Tension Control Automatic Edge Guide Automatic Length Counter Individual Razor Blade Holders Easy to Operate Controls Emergency Stops Casters for Mobility Nexen Pneumatic Brakes Built in the U.S. Inquire Contact us for info or pricing on this...

The Foil Slitting Machine seen here was modeled off of our very own CCSR but designed and built specifically to unwind, slit, and rewind foils and films. Machine Information and SpecsApplicationsFeaturesInquireApplications Materials: Foils, Films Slitting Method: Shear Widths range from 24 and up" Speed Capacity: 600 FPM Power Supply: 110v, 230v Unwind Diameter: 24" Rewind Diameter: 14"...