Converting Equipment for Geosynthetics

This 72" Phantom Axis Turret Rewinder was built using customer specifications and achieving the function of continuously rewinding material while manual unloading of the finished roll is taking place. Machine Information and SpecsApplicationsFeaturesInquireApplications Material: HDPE, EPDM and similar Rewind: Speed:  50 fpm Roll Width: 72” max. Roll Diameter: 22” max. Roll Weight:  800 lbs max....

The VTS machine features a dual turret rewind designed to keep run time to a maximum. This machine will continuously slit and rewind rolls of material to length, stop, cut and glue the ends of the material to their respective slit rolls. The design maximizes runtime and significantly minimizes the operators time in between core...

This Unwind Stand was built to replace a shafted unit with a smaller diameter and less weight capacity. Built for cleanroom use, this stand was designed to make loading large rolls of material easier for the operator. The shaftless design eliminates the need for shafting space and speeds up the roll changeover time. Demo Video...

Video The Versa-SPR (VSPR) is designed and built specifically for slitting and perforating non-wovens used in canister-filled wet (or dry) wipe applications. This machine is capable of unwinding, perforating, slitting, and rewinding (to specific count) a 50" wide roll of non-woven material at a speed of 400fpm. With a turret system consisting of 3 spindles,...

The machine shown an adaptation of our standard CCSR Model Slitter Rewinder. This model provides means to unwind off one (1) 24” wide, 16” diameter master roll of material, score or razor slit to width inline, and rewind material onto one of two (2) 2” rewind shafts to a 4”maximum diameter. The turret feature gives...

The Surface Rewinder shown is built specifically for slitting large rolls of non-wovens of up to 240" (6 meters) in width. Using a heavy duty unwind system, this slitter rewinder is capable of slitting and rewinding rolls weighing up to 3,500 lbs. with a 60" max dia. at 300 fpm. When the slitting process is...

This machine is one of the latest Pinnacle models built for materials such as medical foams and non-wovens. It is a 74" Simplex Turret Slitter Rewinder that is designed and built for non-stop/high output production of consumer products such as wet and dry wipes. This machine has the capability to unwind from a 74” web...

The line above is a 36″ wide custom slitting machine used to slit tough materials such as coated aramids. This machine is designed to accept material on roll of up to 300 lbs., unwind and slit through a series of blades. The material is wound onto cores placed onto (2) rewind shafts. An operator keypad...

This 86” EZ SHEETER Sheeting / Perforating Machine was designed to automatically sheet or perforate a programmed length of non-woven material utilizing a traveling score system.  This machine is capable of accepting material from a roll on the unwind stand and produce sheets of any length and width and is also capable of perforating the...

The machine shown is a 64" Center Surface Slitter Rewinder and was designed to slit master rolls of medical nonwoven material to 1" widths. Fully guarded and secured, this machine was built to slit rolls up to 16" in diameter at 1200fpm. The lifting unwind and guarding around the slitting and rewind sections of the...

The machine shown was built to slit rubber gasket material utilizing low tension loops and score slitting. It was also designed to slit other materials in other operating modes. Machine Information and SpecsApplicationsFeaturesInquireApplications Web Width: 55" Unwind Roll Dia.: 30" Unwind Roll Max. Weight: 500 lbs. Rewind Roll Dia.: 16" Operator Requirement: 1 Speed: Up...

This machine is a modification of our standard CSRE Model Slitter Duplex Rewinder with the specifications to operate inside a cleanroom environment.  This razor slitter rewinder provides means to unwind from a 72” web width, 20” diameter master material roll, razor slit the material in line, and rewind the material onto two rewind air shafts...

This 53" Unwind Stand/Module is a customized piece designed to be integrated into a current manufacturing line. It was build to hold rolls of material with a maximum diameter of 56.0" and a weight of up to 2,500 lbs. The large multi-caliper pneumatic friction brake provided to induce web tension ranging from 1-3 PLI. To...

The slitter rewinder shown is one of our standard machine offerings that was built to spec and is designed to achieve desired cycle times. This turret slitting machine is capable of slitting master rolls of self wound tapes, adhesive films and laminations with a diameter of up to 35″ in. to a minimum .5″ in...

The machine shown is a variation of our standard Surface Slitter Rewinder with additional features built to the customer's spec. With a dual unwind design, this piece of equipment was built to handle rolls of non-woven material up to 74" in width with a diameter of up to 60" and a total weight of 800...

This machine is a modification of our own VSR (Versa) design and was built to slit coated foils to small widths using the stacked shear slitting method. With speeds of up to 400 fpm, this machine is capable of slitting unwind rolls of up to 30" diameter into multiple rolls at 1" wide onto a...

This slitter rewinder was designed to slit adhesive material on rolls of up to 74" wide. This user friendly design includes touch screen controls and a pivoting rewind shaft system that assists the operator in doffing slit rolls without having to lift shafts out of the shaft chucks. Built for speeds of up to 300...

During slitting, having control of the unwinding process can be just as important as having control of your rewinding process. The unwind modules shown here were built for a customer who was looking to upgrade and improve the unwinding segment of their current slitting process. These modules were built and integrated into current slitting lines...

This VSR 60″ Shear Slitting Machine is a custom machine built to handle large rolls. The machine shown here slits material using the shear cutting technique, rewinds onto 12″ diameter cantilevered differential shafts, and unloads the slit rolls automatically to reduce operator handling. Built with the operator’s safety in mind, the pedestal control center can...

The slitting machine shown is an example of one of our tangential stacked shear slitting machines. This machine was built for high-precision slitting and is capable of slitting various materials including thin film. This machine has two (2) cantilevered differential rewind air shafts to suit 3” ID plastic cores. The shaft slip torque is automatically...

The simple, safe, and low maintenance design of the EZ Sheeting Machine allows you to stay productive in your sheeting process. The sturdy welded construction leaves a small footprint which maximizes the space you have in your production facility. Pinnacle's EZ Sheeter has many available options including... stacking exit conveyor casters for mobility tension controls...

The machine shown above is a Duplex Slitter Rewinder with capabilities to slit using both razor and score slitting techniques. This machine was built to spec with the operator in mind utilizing the customer’s needs and requirements. The backlit inspection surface is an addition that assists in detecting flaws or imperfections in the material. The...

This Duplex Slitter Rewinder is a 62″ CSR Razor Slitter built with score and razor slitting capabilities.

The VERSA III Slitter Rewinder, or VSR III, is designed to be an operator-friendly machine that can withstand the rigors of day-to-day production. The design keeps the web path as short as possible to avoid any contaminants, scratching, or wrinkles that can be introduced to the web when traveling over numerous idler rollers. The VSR...

The machine seen here is a custom surface slitter rewinder built to handle large rolls. This machine was built with a heavy duty shaftless unwind stand, a walkover for blade and threading access, as well as, a score slitting package built for cutting 220″+ rolls into rolls of smaller widths. Our capabilities and past project experiences provide...

This slitter rewinder was built to slit material using the surface rewinding method. This machine boasts a small footprint which makes it easy to relocate and stage on your manufacturing floor. Using only 10V power supply, this machine can cut material up to 200 fpm onto 3″ or 6″ cores. Machine Information and SpecsApplicationsFeaturesInquireApplications Material:...

The slitter rewinder shown above is a smaller version of our own in-house slitting machine. This machine has the capability to cut various materials using razor, score, or shear blade slitting methods. It can also be fitted for hot-knife slitting. Video Machine Information and SpecsApplicationsFeaturesOptions/UpgradesInquireApplications Material: Various 30" Diameter Unwind 18" Diameter Duplex Rewind Width: 62"...

Machine Information and SpecsApplicationsFeaturesInquireApplications Med.-High Usage Cutting Method: Ultrasonic Built to slit materials including: plastics, fabrics, films 36" to 96" models standard Slits with sealed edges Features 3" air rewind shafts 30" Diameter Unwind Roll - Larger capacity available 20" Diameter Rewind - Larger capacity available Easy and convenient controls Pneumatic tension brake Automatic tension control...

This slitter rewinder is ideal for manufacturers working with films and foils. With a footprint of 6x10', the machine shown is capable of slitting a roll weighing up to 700 lbs. up to 600 fpm. Other details and specs are below. Machine Information and SpecsApplicationsFeaturesOptional FeaturesInquireApplications Material: Films 20" Diameter Unwind Roll - Larger capacity available...

The HSRE is the simplest Hot Knife Slitting Machine that we offer. It is designed for roll sizes of up to 14" in diameter. Perfect for materials such as nylon and poly-cotton fabrics, this machine can hot knife slit rolls of material that requires a sealed edge to prevent fraying. More specs and details are...

Machine Information and SpecsApplicationsFeaturesInquireApplications Width: 50″ Web Slitting Method: Razor Slitting Speed: 100 fpm Rewind Diameter: 12″ Unwind Diameter: 18″ Power: 110v Features Automatic Tension Control Automatic Edge Guide Automatic Length Counter Individual Razor Blade Holders Easy to Operate Controls Emergency Stops Casters for Mobility Nexen Pneumatic Brakes Built in the U.S. Inquire Contact us for info or pricing on this...

The Foil Slitting Machine seen here was modeled off of our very own CCSR but designed and built specifically to unwind, slit, and rewind foils and films. Machine Information and SpecsApplicationsFeaturesInquireApplications Materials: Foils, Films Slitting Method: Shear Widths range from 24 and up" Speed Capacity: 600 FPM Power Supply: 110v, 230v Unwind Diameter: 24" Rewind Diameter: 14"...

Suited for small rolls of material, our tabletop sheeting machines are perfect for sheeting material using a small amount of space and one operator. The machine seen here was built specifically for material approximately 15 inches wide, can be easily set-up, and only requires one operator.

An excellent addition to any operation not in need of a full-time sheeting machine. The semi-manual sheeting machine shown here allows an operator to easily load a roll of material onto its unwind stand. The operator then pulls material through to the set length, triggering the material clamp, allowing the operator to manually cut the…